785.271.5816 | info@fsea.com



InsideFinishing Articles by Keyword

Cold Foiling

New Processes Provide Decorative Choices
by Jeff Peterson     February-March, 2009     Technology Focus

Cold Foil Technology: Opening New Markets
by Kym Conis     November-December, 2006     Technology Focus

A Closer Look into Foil Stamping and Embossing
by Jeff Peterson     August-September, 2004     Special Report

"In-Line" Becoming the "In" Thing
by Jeff Peterson     August-September, 2001     Technology Focus

Application Equipment at the Dawn of a High-Speed Age
by Jeff Peterson     November-December, 1998     Technology Focus


Diecutting

Finishing Options for Digitally Printed Labels
by Jeff Peterson    February-March, 2014     Rotary

Laser Cutting Systems for Dieboards
by Mike Adams, Adams Technologies, Inc.    November-December, 2013     Technology

Ejection Rubber Dilemma: Durometer or Compression/Deflection?
by David West, Essential Products, Inc.    November-December, 2012     Technology

Basic Rubbering Techniques
by Roger A. Brown, Monroe Rubber & Plastic, Inc.    February-March, 2011     Technology

It’s All About Time : Optimizing Production Efficiencies
by Chris Raney, VP Business Unit Sheet Fed, Bobst Group North America    August-September, 2010     Technology Focus

Foil Stamping/Diecutting on Cylinder Presses
by Staff    February-March, 2010     Question and Answer

One-Pass Embossing and Diecutting
by Metal Magic    August-September, 2009     Question and Answer

Braille Standards Soon to Become Commonplace
by Staff    May-June, 2009     Special Report

Strategies for Optimal Diecutting
by Kevin Carey, DieInfo    February-March, 2009     Question and Answer

Eliminating Static with Diecutting
by Mark Baril, Cut Smart Manufacturing, Inc.    May-June, 2008     Technology Focus

Diecutters Rise to the Challenge as Short Runs Proliferate
by Ralph Pasquariello    May-June, 2007     Technology Focus

Working with In-line Registered Embossing
by Jeff Peterson    May-June, 2007     Question and Answer

Plastic Sheets: Converting a Different Animal
by Jeff Peterson    February-March, 2007     Technology Focus

Stripping Tool Design and Fabrication Considerations in Automatic Platen Diecutting
by Dan Witucki, Advanced Die Supplies    May-June, 2005     Technology Focus

Automated Rule Bending Systems
by Robert L. Carter    May-June, 2004     Technology Focus

Changing with the Times - Technology Advancement in Die Making
by Bruce Byrne, Southeastern Die    May-June, 2003     Technology Focus

Guide to Selecting Steel Rule
by Mark Batson Baril    November-December, 2002     Question and Answer

Diecutter/Diemaker Communication - Success or Failure in Business
by Robert A. Larson    May-June, 2002     Special Focus

Knowing the Ins and Outs of Used Equipment
by Staff    May-June, 2002     Question and Answer

"In-Line" Becoming the "In" Thing
by Jeff Peterson    August-September, 2001     Technology Focus

Should You Have an In-Plant Dieshop? No and Yes
by Robert Larson, President of Larson Worldwide, Inc.    May-June, 2001     Technology Focus

New Innovations Take Center Stage at FSEA Conference
by Staff     February-March, 2001     Technology Focus

Diecutting Pre-Makeready: Racing Toward Success
by John Maddox, Simonds Notting     May-June, 2000     Technology Focus

Capital Equipment - When Should I Buy?
by Jeff Peterson    August-September, 1999     Technology Focus

Who's Making the Rules?
by Mark Batson Baril    May-June, 1999     Technology Focus

What is the ANSI B65.5-1996 & How Does it Affect Me?
by Robert Weidhaas, Jr. of Preco Industries, Inc.    November-December, 1998     Question and Answer

Integrating the Graphic and Diecutting Processes
by Kevin B. Carey    May-June, 1998     Technology Focus

What type of safety standards are available for graphic finishing operations?
by Staff    May-June, 1996     Question and Answer

The Development and Use of Embossing in Steel Rule Cutting Dies
by March Love, Atlas Die, Inc.    February-March, 1996     Technology Focus

What type of system is recommended for storing steel rule dies?
by Staff     November-December, 1995     Question and Answer


Embossing

Sterling Toggle Die Positioning System
by Jen Clark     May-June, 2014     Tech Watch

Foil Stamping/Embossing Efficiencies More Important than Ever
by Jeff Peterson     August-September, 2012     Technology

Foil and Embossing Engravings
by Staff     November-December, 2011     Question and Answer

Makeready Efficiencies in Foil Stamping/Embossing
by Staff     February-March, 2011     Question and Answer

CNC Tooling Software for CNC Engravings
by Staff     August-September, 2010     Question and Answer

Makeready and Set-Up for Large Format Combination Stamping
by Staff     November/December, 2009     Question and Answer

One-Pass Embossing and Diecutting
by Metal Magic     August-September, 2009     Question and Answer

Braille Standards Soon to Become Commonplace
by Staff     May-June, 2009     Special Report

Now there is Proof– Foil Can be a Sustainable Choice
by Jeff Peterson     November-December, 2008     Special Report

Storing and Handling Foil Stamping and Embossing Dies
by     August-September, 2007     Question and Answer

Working with In-line Registered Embossing
by Jeff Peterson     May-June, 2007     Question and Answer

A Closer Look at CNC Engraving Technology
by Staff     February-March, 2006     Question and Answer

Self-Leveling Combination Foil Stamping and Embossing Makeready
by Jim Kingsby     February-March, 2006     Technology Focus

Die Lock-up Holding Tight with the Times
by Jeff Peterson     November-December, 2004     Technology Focus

A Closer Look into Foil Stamping and Embossing
by Jeff Peterson     August-September, 2004     Special Report

Foil Stamping Strengthens Brand Identity - It's a Fact!
by Elliot Young     May-June, 2004     Special Report

Tackling Multiple Pass Registration on a Cylinder
by Jim Kingsby     February-March, 2004     Technology Focus

Tackling Multiple Pass Registration
by Jim Kingsby     August-September, 2003     Technology Focus

Safety Issues With Foil Stamping Presses
by Staff     February-March, 2003     Question and Answer

Knowing the Ins and Outs of Used Equipment
by Staff     May-June, 2002     Question and Answer

The ‘Ins’ and ‘Outs’ of Digital Artwork: What the Diemaker Needs
by Kym Conis     February-March, 2002     Question and Answer

"In-Line" Becoming the "In" Thing
by Jeff Peterson     August-September, 2001     Technology Focus

Decreasing Downtime on Your Foil Stamping Press
by Chris Van Pelt     August-September, 2001     Question and Answer

Awareness of Potential Hot Stamping Foil Challenges
by Jeff Peterson     February-March, 2001     Question and Answer

New Innovations Take Center Stage at FSEA Conference
by Staff     February-March, 2001     Technology Focus

Die Lockup Methods
by Jeff Peterson     February-March, 2000     Question and Answer

Embossing Techniques
by Jeff Peterson     November-December, 1999     Question and Answer

Capital Equipment - When Should I Buy?
by Jeff Peterson     August-September, 1999     Technology Focus

Making That Engraving Choice
by Jeff Peterson     February-March, 1999     Technology Focus

Application Equipment at the Dawn of a High-Speed Age
by Jeff Peterson     November-December, 1998     Technology Focus

What is the ANSI B65.5-1996 & How Does it Affect Me?
by Robert Weidhaas, Jr. of Preco Industries, Inc.     November-December, 1998     Question and Answer

Saving Time on Set-up
by Carla Davenport     August-September, 1998     Technology Focus

What type of safety standards are available for graphic finishing operations?
by Staff     May-June, 1996     Question and Answer

The Development and Use of Embossing in Steel Rule Cutting Dies
by March Love, Atlas Die, Inc.     February-March, 1996     Technology Focus

Photoengraving options for today's graphic finishers
by Staff     August-September, 1995     Technology Focus

How do I get the most out of my multi-level embossing?
by Staff     May-June, 1995     Question and Answer


Film Laminating

Finishing Options for Digitally Printed Labels
by Jeff Peterson     February-March, 2014     Rotary

Laminating Films
by Francis Shea, M. Digital, Inc.     November-December, 2013     Question and Answer

Laminating Films
by Staff     November-December, 2010     Question and Answer

Growth Opportunities Paint New Print Finishing Landscape
by Jeff Peterson, Executive Director, FSEA     May-June, 2010     Special Report

Exploring Options with Thermal Film Laminating
by Bob Polanzi, Protect-all     November-December, 2007     Question and Answer

A Closer Look at Laminating Films
by Staff     February-March, 2005     Question and Answer

Solving Film Laminating Challenges
by Staff     November-December, 2003     Question and Answer

New Innovations with Film Laminating
by Jeff Peterson     February-March, 2002     Technology Focus

Film Laminating - Moving into the Automated Age
by Jeff Peterson     August-September, 2000     Technology Focus

Lamination-Taking on a New Face
by staff     November-December, 1999     Technology Focus


Foil Fusing

High-Speed Foil Fusing
by Jen Clark     February-March, 2014     Tech Watch

High Speed Foil Fusing
by By Chris VanPelt, Therm-O-Type     August-September, 2009     Technology Feature

New Processes Provide Decorative Choices
by Jeff Peterson     February-March, 2009     Technology Focus


Foil Stamping

A Closer Look at CNC-Engraved Dies
by David Bohne, h+m USA Dies     August-September, 2014     Technology

Sterling Toggle Die Positioning System
by Jen Clark     May-June, 2014     Tech Watch

Finishing Options for Digitally Printed Labels
by Jeff Peterson     February-March, 2014     Rotary

Make Rotary Foil Stamping Profitable
by Tom Kirtz, Telstar Engineering     November-December, 2013     Rotary

Overprinting on White Foil
by Staff     May-June, 2013     Question and Answer

The Growth of Narrow Web Inline Foil Applications
by Dianna Brodine     May-June, 2013     Rotary Trends

Planning to Reduce Foil Waste
by Staff     February-March, 2013     Focus

Rotary Hot Stamping Dies and Tooling
by Staff     February-March, 2013     Question and Answer

Foil Stamping/Embossing Efficiencies More Important than Ever
by Jeff Peterson     August-September, 2012     Technology

Options Expanding for Decoration Beyond Print
by Jeff Peterson, Foil & Specialty Effects Association     February-March, 2012     Focus

Foil and Embossing Engravings
by Staff     November-December, 2011     Question and Answer

Holographic Foil and Other Enhancements lend sales boost to AWG Private-Label Packages
by Staff     November-December, 2011     Focus

Makeready Efficiencies in Foil Stamping/Embossing
by Staff     February-March, 2011     Question and Answer

Foil Stamping/Diecutting on Cylinder Presses
by Staff     February-March, 2010     Question and Answer

Makeready and Set-Up for Large Format Combination Stamping
by Staff     November/December, 2009     Question and Answer

New Processes Provide Decorative Choices
by Jeff Peterson     February-March, 2009     Technology Focus

Now there is Proof– Foil Can be a Sustainable Choice
by Jeff Peterson     November-December, 2008     Special Report

Working with Difficult-to-Stamp Surfaces
by Staff     August-September, 2008     Question and Answer

Registered Holograms for Short-Run Work
by Jeff Peterson     November-December, 2007     Technology Focus

Storing and Handling Foil Stamping and Embossing Dies
by     August-September, 2007     Question and Answer

Plastic Sheets: Converting a Different Animal
by Jeff Peterson     February-March, 2007     Technology Focus

A Closer Look at CNC Engraving Technology
by Staff     February-March, 2006     Question and Answer

Self-Leveling Combination Foil Stamping and Embossing Makeready
by Jim Kingsby     February-March, 2006     Technology Focus

Die Lock-up Holding Tight with the Times
by Jeff Peterson     November-December, 2004     Technology Focus

A Closer Look into Foil Stamping and Embossing
by Jeff Peterson     August-September, 2004     Special Report

Foil Stamping Strengthens Brand Identity - It's a Fact!
by Elliot Young     May-June, 2004     Special Report

Tackling Multiple Pass Registration on a Cylinder
by Jim Kingsby     February-March, 2004     Technology Focus

Tackling Multiple Pass Registration
by Jim Kingsby     August-September, 2003     Technology Focus

Safety Issues With Foil Stamping Presses
by Staff     February-March, 2003     Question and Answer

Knowing the Ins and Outs of Used Equipment
by Staff     May-June, 2002     Question and Answer

The ‘Ins’ and ‘Outs’ of Digital Artwork: What the Diemaker Needs
by Kym Conis     February-March, 2002     Question and Answer

"In-Line" Becoming the "In" Thing
by Jeff Peterson     August-September, 2001     Technology Focus

Decreasing Downtime on Your Foil Stamping Press
by Chris Van Pelt     August-September, 2001     Question and Answer

Awareness of Potential Hot Stamping Foil Challenges
by Jeff Peterson     February-March, 2001     Question and Answer

New Innovations Take Center Stage at FSEA Conference
by Staff     February-March, 2001     Technology Focus

Die Lockup Methods
by Jeff Peterson     February-March, 2000     Question and Answer

Foil vs Foilboard
by Kym Conis     February-March, 2000     Technology Focus

Capital Equipment - When Should I Buy?
by Jeff Peterson     August-September, 1999     Technology Focus

Preventing Air Entrapment and Gassing with Foil
by Paul Miller     May-June, 1999     Question and Answer

Foil Stamping Image Holograms
by Christopher Van Pelt     February-March, 1999     Question and Answer

Making That Engraving Choice
by Jeff Peterson     February-March, 1999     Technology Focus

Application Equipment at the Dawn of a High-Speed Age
by Jeff Peterson     November-December, 1998     Technology Focus

What is the ANSI B65.5-1996 & How Does it Affect Me?
by Robert Weidhaas, Jr. of Preco Industries, Inc.     November-December, 1998     Question and Answer

Saving Time on Set-up
by Carla Davenport     August-September, 1998     Technology Focus

Meeting the Challenge of UV Coatings & Hot Stamping Foil
by Staff     May-June, 1998     Question and Answer

What type of safety standards are available for graphic finishing operations?
by Staff     May-June, 1996     Question and Answer

What are my concerns when overprinting foil?
by Staff     February-March, 1996     Question and Answer

Recovery options for hot stamping foil scrap
by Staff     November-December, 1995     Technology Focus

Photoengraving options for today's graphic finishers
by Staff     August-September, 1995     Technology Focus

How can I stamp a large solid and fine type together in the same pass?
by Staff     February-March, 1995     Question and Answer


Folding/Gluing

Overcoming Adhesive Challenges in the Folding/Gluing Process
by Staff     August-September, 2014    Question and Answer

Gluing Systems
by Staff     August-September, 2012    Question and Answer

The New Generation of Gluing Standards
by Christopher M. Leary, W.H. Leary Co., Inc.     August-September, 2011    Focus

Modern Folding and Gluing Technologies Take Their Cue from Innovative Carton Design
by Dan Maurer, Heidelberg USA, and Beatrice Schmitt, Heidelberger Druckmachinen AG     February-March, 2010    Technology Focus

Ancillary Equipment Key to Folding/Gluing Success
by Jeff Peterson     November-December, 2008    Technology Feature

Don't Come Unstuck Over Folding and Gluing
by Uvan Magni, Technical Product Manager, Bobst Group North America     August-September, 2007    Special Focus

Ancillary Systems for Folding-Gluing Equipment Continue to Change
by Staff     August-September, 2006    Question and Answer

Trends and Styles in Folding and Gluing
by Alan Thompson     August-September, 2005    Technology Focus

Working with Pocket Folder Challenges on a Folder/Gluer
by Staff     August-September, 2004    Question and Answer

What to Look for When Making a New Folder/Gluer Purchase
by Staff     August-September, 2003    Question and Answer

Getting Your Folder/Gluer Organized
by Staff     August-September, 2002    Technology Focus

Automation and Computerization with Fold/Gluing Equipment
by Jeff Peterson     May-June, 2001    Question and Answer

Folding/Gluing Folding Cartons - Those Unforeseen Challenges
by staff     August-September, 2000    Question and Answer

Challenges with Folding/Gluing CD Wallets
by Jeff Peterson     August-September, 1999    Question and Answer

What should a buyer look for when considering the purchase of folding/gluing equipment?
by Staff     August-September, 1996    Question and Answer


Green Initiatives

Where Finishing Ends
by Victor Bell, Environmental Packaging International     May-June, 2012     Special Report

GreenBlue® Reports on Sustainability of Decorative Processes on Paperboard
by Staff     August-September, 2011     Special Report

Green-er UV Coatings
by Staff     May-June, 2011     Question and Answer

The Sustainable Facts about Metalized Decorating Techniques
by Jeff Peterson, Executive Director, FSEA and David Hutchison, CEO/Managing Member, BrightMARKS, LLC     August-September, 2010     Special Report

Pathways to Green: An Introduction for the Print Finishing Industry
by Reneé Varella     August-September, 2008     Special Report

Leadership in Paper and the Environment
by Derek Smith     February-March, 2008     Special Report


Holograms

Maximizing CDI Technology to Enhance and Protect Brands
by Nigel Abraham, 3DCD, LLC. (Diffractive Arts)     May-June, 2014     Focus

Holographic Foil and Other Enhancements lend sales boost to AWG Private-Label Packages
by Staff     November-December, 2011     Focus

Holography's Continuing Contribution to Improved Odds
by Ian M. Lancaster; Reconnaissance International     November-December, 2011     Special Report

Advancements in Technology Drive Holography Trends
by Staff     November-December, 2010     Technology Focus

Registered Holograms for Short-Run Work
by Jeff Peterson     November-December, 2007     Technology Focus

The Passing of the Guard - a Tribute to the Entrepreneurs of Holography
by Staff     November-December, 2005     Special Focus

Embossed Holography Made Affordable in Low Production Runs
by Peter Scheir     November-December, 2004     Special Report

Hologram Registration Mark Design
by Terry Gallagher of Total Register, Inc.     November-December, 2001     Special Focus

Holograms Becoming Feasible Option
by Allen Rhody     November-December, 2000     Technology Focus

Foil Stamping Image Holograms
by Christopher Van Pelt     February-March, 1999     Question and Answer

Call Security! Anti-Counterfeit Protection Opens New Opportunities
by Staff     May-June, 1995     Technology Focus


Laser Cutting

Finishing Options for Digitally Printed Labels
by Jeff Peterson     February-March, 2014     Rotary

Decorative Laser Cutting for the Trade
by Staff     August-September, 2013     Question and Answer

Laser Cutting
by Staff     February-March, 2012     Question and Answer

Trends in Laser Cutting Applications
by By Tom Hrutky, Creative Director, Laser Excel     May-June, 2009     Technology Focus

New Processes Provide Decorative Choices
by Jeff Peterson     February-March, 2009     Technology Focus


Lifetime Achievement Awards

Robert Waitts Remembered with the FSEA Lifetime Achievement Award
by By Staff     May-June, 2014     Lifetime Achievement Award

It’s All About the Sizzle - FSEA Lifetime Achievement Award Recipient Harry Voss
by Amy Bauer     February-March, 2012     Lifetime Achievement Award

A Journey of Knowledge- FSEA Lifetime Achievement Award Recipient: Ed Hughes
by Kym Conis     February-March, 2010     Lifetime Achievement Award

A Lifetime of Customers, Generations of Friends - FSEA Lifetime Achievement Award Recipient: Fred Isler
by Reneé Varella     February-March, 2008     Lifetime Achievement Award

Pioneering Territories Unknown - FSEA Lifetime Achievement Award Recipient: John Tinnon
by Kym Conis     February-March, 2007     Lifetime Achievement Award

A Guiding Light - 2006 FSEA Lifetime Achievement Award Recipient - Tom Cullen
by Kym Conis     February-March, 2006     Lifetime Achievement Award

A Man of Vision - Glenn Hutchison
by Staff     February-March, 2004     Lifetime Achievement Award


Management Trends

Delegation Trains Everyone
by Justin Tyme     May-June, 2014     Management

The Economy and Print Markets in 2014-2015
by     February-March, 2014     Focus

Building a Defense for Your OSHA Compliance
by Rick Hartwig, Printing Industries of America     August-September, 2013     Strategies

High-Visibility Enhancements Seeing Strong Growth
by Jeff Peterson     August-September, 2013     Trends

The Top 10 Traps in OSHA Compliance
by Renée Varella     November-December, 2008     Management Trends

Pathways to Green: An Introduction for the Print Finishing Industry
by Reneé Varella     August-September, 2008     Special Report

OSHA Publications and Posters
by Staff     May-June, 2008     Safety Forum

A Lifetime of Customers, Generations of Friends - FSEA Lifetime Achievement Award Recipient: Fred Isler
by Reneé Varella     February-March, 2008     Lifetime Achievement Award

Leadership in Paper and the Environment
by Derek Smith     February-March, 2008     Special Report

Database Marketing is an Art Form
by BMA Knowledge Base, Business Marketing Association     February-March, 2007     Management Trends

Pioneering Territories Unknown - FSEA Lifetime Achievement Award Recipient: John Tinnon
by Kym Conis     February-March, 2007     Lifetime Achievement Award

Improve Productivity on the Shop Floor (Part 2)
by Raymond J. Prince, Senior Technical Consultant, PIA/GATF     November-December, 2006     Special Report

Workplace Safety – Is It a Benefit or a Curse?
by Bill Effron, President, Alco Print Finishers     November/December, 2006     Management Trends

Improve Productivity on the Shop Floor (Part 1)
by Raymond J. Prince, Senior Technical Consultant, PIA/GATF     August-September, 2006     Technology Focus

It's Time to Fine Tune Your Business Insurance
by Provided by Sentry Insurance     May-June, 2006     Management Trends

A Guiding Light - 2006 FSEA Lifetime Achievement Award Recipient - Tom Cullen
by Kym Conis     February-March, 2006     Lifetime Achievement Award

InsideFinishing's 10th Anniversary Celebration - A Snapshot View
by Kym Conis     November-December, 2005     Special Report

Managers: Rid Your Sales Team of Parasites
by Landy Chase     November-December, 2005     Management Trends

Manage the Cost of Quoting
by Dave Fellman     May-June, 2005     Management Trends

Faith in Numbers - The Changing Demographics of the Printing Industry Reflect its Many Challenges and Opportunities
by Richard Romano     November-December, 2005     Special Report

Foil Stamping Strengthens Brand Identity - It's a Fact!
by Elliot Young     May-June, 2004     Special Report

A Man of Vision - Glenn Hutchison
by Staff     February-March, 2004     Lifetime Achievement Award

New Tax Laws Provide Added Incentive for Capital Equipment Purchases
by Staff     November-December, 2003     Special Focus

Sometimes the Easiest Way to Increase Sales and your Bottom Line is RIght Under your Nose
by Mark Porter     May-June, 2003     Special Focus

Identifying Useful Information for Long-term Planning
by David S. Hutchison     February-March, 2003     Special Focus

A Rose by Any Other Name
by Oliver Moesgen     November-December, 2002     Special Focus

Foil vs Foilboard
by Kym Conis     February-March, 2000     Technology Focus

Capital Equipment - When Should I Buy?
by Jeff Peterson     August-September, 1999     Technology Focus

What is the ANSI B65.5-1996 & How Does it Affect Me?
by Robert Weidhaas, Jr. of Preco Industries, Inc.     November-December, 1998     Question and Answer

What type of safety standards are available for graphic finishing operations?
by Staff     May-June, 1996     Question and Answer

How do I begin a maintenance program for my stamping and die cutting equipment?
by Staff     August-September, 1995     Question and Answer


Mounting/Laminating

Challenges with Mounting/Laminating
by Jeff Peterson     November-December, 2001     Question and Answer

Challenges with Mounting/Laminating
by Jeff Peterson     November-December, 2000     Question and Answer


Off-line UV Coating

UV-Coating Adds Appeal to Labels
by Chris Calomino, ACTEGA Kelstar     August-September, 2014     Focus

Finishing Options for Digitally Printed Labels
by Jeff Peterson     February-March, 2014     Rotary

UV Film Casting
by Staff     November-December, 2012     Question and Answer

Options Expanding for Decoration Beyond Print
by Jeff Peterson, Foil & Specialty Effects Association     February-March, 2012     Focus

Green-er UV Coatings
by Staff     May-June, 2011     Question and Answer

Growth Opportunities Paint New Print Finishing Landscape
by Jeff Peterson, Executive Director, FSEA     May-June, 2010     Special Report

Specialty UV Coatings: The “Finishing Touch” for Off-Line Finishing Projects
by Kris Getty, Henkel Corporation     November/December, 2009     Technology Feature

Guidelines for UV Coating Applications
by Kenneth Corman, Westlam     February-March, 2008     Technology Focus

UV Coatings and Inks
by Staff     May-June, 2006     Question and Answer

Why Do You Need a Radiometer for UV Coating?
by Staff     August-September, 2005     Special Focus

Safety and Handling of UV Coatings
by Staff     August-September, 2002     Question and Answer

Is UV-Coating the Right Choice for You?
by Jeff Peterson     May-June, 2000     Question and Answer

Meeting the Challenge of UV Coatings & Hot Stamping Foil
by Staff     May-June, 1998     Question and Answer

What Sets UV, Aqueous and Laminates Apart?
by Staff     May-June, 1996     Technology Focus


UV Film Casting

Growth Opportunities Paint New Print Finishing Landscape
by Jeff Peterson, Executive Director, FSEA     May-June, 2010     Special Report

Specialty UV Coatings: The “Finishing Touch” for Off-Line Finishing Projects
by Kris Getty, Henkel Corporation     November/December, 2009     Technology Feature

New Processes Provide Decorative Choices
by Jeff Peterson     February-March, 2009     Technology Focus